STEPS: To Set Up the AS/400e Server 

Install Hardware

This is the responsibility of the company from whom you purchase the server. 

Change ‘QSECOFR’ Password to ‘ONECASE’

Sign on as QSECOFR.
At the first opportunity, change the password to ‘ONECASE’ or appropriate password.
Write the password down in a safe place and tell someone else where it is. 

Add User Profile for ‘G400SEC’

Sign on as QSECOFR.
Create user profile G400SEC by copying QSECOFR.
Write down the password you give G400SEC and keep it in a safe place.

Maintain System Values

Sign on as QSECOFR or G400SEC.
Type the command WRKSYSVAL on a command line and press Enter.
Change the values.

Connect Communication Line

Give Cox the telephone number.

Bring up TCP/IP Network

Go HARDWARE to determine Resource Name.
Go TCPADM to begin.
CRTLINETH Line Description=ETHTCP Resource=CMN02 AUTOCREATE=*YES
Configure TCP/IP Interface.
Define local domain and host table entries.

Set up Backup Procedures

Add TCP commands to start menu

Add STRTCP and STRHOSTSVR *ALL to the commands which execute when you IPL the AS/400.

Restore ONECase libraries and help folders

Use the ‘RSTLIB command to restore ONECase libraries from the tape.
To speed up the install process, be sure to specify ‘*LEAVE’ on the RSTLIB command.
The tape device is usually named ‘TAP01’ but you may have to use ‘GO HARDWARE’ to find the Device Name
on the server.

G4001CSO G4001UTIL CLLINK
G4001DB G4001TRN G400INST G4001RLS
G400NNNN where NNNN is the county number — for example, Cleveland is ‘3023'.

G4001CSO should contain CL programs SUTRN and SUXXX where XXX is the county abbreviation.

Rename G4001DB to G4001CSD

This will set up your initial database.
Sign on as ‘G400SEC’ worker.
Use CPYF command to copy files from G4001DB to G4001CSD.

Convert Objects to RISC

If necessary, run the command STROBJCVN *ALLUSR to convert all objects from CISC to RISC.

Set up Initial User Profiles

Sign on as QSECOFR.
Create user profile ‘TOMCOX’ by copying QSECOFR.
Copy G400SEC to create a profile for each ONECase system administrator.
The ONECase administrators are the 2-3 workers who support all workers in the agency.
Unit co-ordinators support a unit within a Provider -- we’ll set them up later.
Create one Provider profile, then create the others by copying it.
Create a profile ‘CA400' for default sign on to Client Access.
You will not need to set up a Worker record for ‘CA400'.
Test the user profiles by signing onto AS/400.

System Administrator G400SEC 
CA/400 Default CA400
Provider Profiles ADM ADS CWS CDC 
Initial Menu CSMN18 ADMN71 CPMN51 DCMN41

IM RC SI
CFMN61 RCMN31 RCMN31

Note that Worker records for G400SEC and the Provider workers are already defined in G4001DB. In a later step, you will have to add the ONECase administrators to the Worker file.

.
Change User Profile (CHGUSRPRF) 

Type choices, press Enter. 

User profile . . . . . . . . . . > ADM Name 
User password . . . . . . . . . ADM Name, *SAME, *NONE 
Set password to expired . . . . *NO *SAME, *NO, *YES 
Status . . . . . . . . . . . . . *ENABLED *SAME, *ENABLED, *DISABLED 
User class . . . . . . . . . . . > *USER *SAME, *USER, *SYSOPR... 
Assistance level . . . . . . . . *SYSVAL *SAME, *SYSVAL, *BASIC... 
Current library . . . . . . . . *CRTDFT Name, *SAME, *CRTDFT 
Initial program to call . . . . SUXXX Name, *SAME, *NONE XXX is County
Abbreviation
Library . . . . . . . . . . . G4001CSO Name, *LIBL, *CURLIB 
Initial menu . . . . . . . . . . XXXXXX Name, *SAME, *SIGNOFF
Library . . . . . . . . . . . *LIBL Name, *LIBL, *CURLIB 
Limit capabilities . . . . . . . *YES *SAME, *NO, *PARTIAL, *YES 
Text 'description' . . . . . . . Worker Name 

... 
.

Set up Initial Programs

SUXXX/G001CSO, where ‘XX’ is county abbreviation. (for example, SUCLV)
SUTRN.

Set up CLLink

Sign on as security officer.
Load CLLink library from media provided by CL.
Call program CLLINKINZ to build two user profiles (ID/password).
CLLINKHOST/CLLINK and CLLINKRMOT/CLLINK.
Sign on as CLLINKHOST/CLLINK to vary on line and controller.
Procedure signs off automatically.
Ensure CLLINK user profile has *IOSYSCFG authority.
Test log in from CoxCo.