Step 1: Define AS/400 User Profile

Sign on as a System Administrator. 
Sign on to the AS/400 using an ID that lets you key commands on the command line,
for example, ‘G400SEC’. 
If your ID does not have ‘command line’ support, the AS/400 will give you a message.

Create the ‘copy from’ Provider profiles.
The G4001CSD data library will already contain a worker record for each Provider.
You must set up a ‘copy from’ profile for each Provider.
Then you will copy these profiles to create a AS/400 user profile for each worker. 

From the command line, type:

WRKUSRPRF USRPRF(G400SEC).

Press Enter.
A screen showing the ‘G400SEC’ will appear.

       User
Opt Profile Text

3 G400SEC System Administrator

Key a ‘3' beside the ‘G400SEC’ profile, press Enter.
The ‘Create User Profile’ screen will appear.

Key the highlighted data fields shown below, press Enter.
Unless you know what you are doing, do not change any of the other values.
.
Create User Profile (CRTUSRPRF) 

Type choices, press Enter. 

User profile . . . . . . . . . . IM Name 
User password . . . . . . . . . > *USRPRF Name, *USRPRF, *NONE 
...
Initial Program . . . . . . . . See Chart below
Library. . . . . . . . .
Initial Menu . . . . . . . . . . See Chart below
Library. . . . . . . . .
User class . . . . . . . . . . . *USER
Limit Capabilities . . . . . . . *YES 
Text 'description' . . . . . . . > 'IM Worker' 
...
.

Repeat the steps for the other Providers: ADM, ADS, CDC, CWS, RC, SI

User                   Initial Initial
Profile                 Text Program/Library 
                         Menu/Library

ADM ADM Worker SUXXX/G4001CSO CSMN18/G4001CSO
ADS ADS Worker SUXXX/G4001CSO ADMN71/G4001CSO
CDC CDC Worker SUXXX/G4001CSO DCMN41/G4001CSO
CWS CWS Worker SUXXX/G4001CSO CPMN51/G4001CSO
IM IM Worker SUXXX/G4001CSO CFMN61/G4001CSO
RC RC Worker SUXXX/G4001CSO RCMN31/G4001CSO
SI SI Worker SUXXX/G4001CSO CSMN21/G4001CSO

where ‘XXX’ is a three-letter county abbreviation.

Create the worker profiles.
The G4001CSD data library will already contain a worker record for each Provider.
Copy the ‘copy from’ profiles to create a AS/400 user profile for each Provider’s worker. 

From the command line, enter:

WRKUSRPRF USRPRF(XXX), where ‘XXX’ is the Provider of the worker.

Press Enter.
A screen showing the profile will appear.

      User
Opt Profile Text

3 Profile ‘XXX Worker’

Key a ‘3' beside the profile, press Enter.
The ‘Create User Profile’ screen will appear.
Key the highlighted data fields shown below.
The Worker ID will become the User ID you sign on with.
The password for the Worker ID will be the Worker ID itself.
‘Text’ is the worker’s name.
Unless you know what you are doing, do not change any of the other values.
Press Enter.
You will see message saying that the profile has been created.

.
Create User Profile (CRTUSRPRF) 

Type choices, press Enter. 

User profile . . . . . . . . . . WORKERID Name 
User password . . . . . . . . . > *USRPRF Name, *USRPRF, *NONE 
...
Limit Capabilities . . . . . . . *YES 
Text 'description' . . . . . . . > 'Worker’s Name'
...
.